Skip to main content

Master Finish

Commercial & Industrial Epoxy Flooring

Epoxy gives commercial and industrial sites a seamless, sealed surface that’s easy to clean and resists wear from daily traffic. We install epoxy systems in warehouses, workshops, factories, showrooms and back-of-house areas across NSW and the ACT.

Blue and light grey two-tone epoxy floor at the RepairHub project

01Applications

Where it's used

  • Warehouses and logistics
  • Workshops and smash repair
  • Manufacturing floors
  • Showrooms and retail back-of-house
  • Plant rooms and amenities

02Specification

What decides the system

  • Traffic type: foot, trolley or forklift
  • Chemical and oil exposure
  • Slip-resistance needs
  • Moisture in the slab
  • Colour zoning and line marking
  • Downtime available for installation

↗Project

RepairHub

Two-tone epoxy, with blue work areas and light-grey zones.

High-gloss blue epoxy floor with grey zones at the RepairHub project

03Process

How we install it

  1. 01

    Inspect

    We check the concrete, moisture, cracks, joints and existing coatings, and confirm how the floor will be used.

  2. 02

    Prepare

    Diamond grinding or mechanical preparation, then crack, joint and defect repairs. Most coating failures start here.

  3. 03

    Install

    Primer, body and top coats for the specified system, with coving, line marking or colour zones built in.

  4. 04

    Hand over

    Correct cure time before traffic returns, plus care and cleaning guidance.

04Project photos

Our work

Blue and light grey two-tone epoxy floor at the RepairHub projectHigh-gloss blue epoxy floor with grey zones at the RepairHub projectCompleted two-tone epoxy floor at the RepairHub projectEpoxy floor in an automotive workshopBlue epoxy floor coating in a narrow roomLight grey gloss epoxy floor in a large shed at Sutton Forest NSWMaster Finish installer applying epoxy coating at the RepairHub project

04Project video

On site

Two-tone blue and grey epoxy floor
Workshop floor: before and after epoxy coating

05FAQ

Common questions

How long before we can use the floor?

It depends on the system and site temperature. Foot traffic is usually possible sooner than vehicle traffic. We confirm cure times for your system before work starts.

Can you coat over an existing coating?

Sometimes. It depends on how well the existing coating is bonded. We check on site and often remove or grind back failing coatings first.

Do you offer slip-resistant finishes?

Yes. Texture can be added to suit wet or high-traffic areas.

→Next step

Let's talk about your floor.

Send us the floor area, location and current condition. Photos or plans help us quote accurately.