Warehouse floors take constant forklift and pallet traffic, and dust from untreated concrete gets into stock and equipment. We prepare the slab properly, then install an epoxy system that seals it, cuts dust and makes walkways and bays clear. We also repair damaged joints, cracks and worn coatings on existing warehouse floors.

01Applications
02Specification
01Forklift traffic
Forklift and pallet-jack traffic concentrates wear at turning areas, dock entries and joints. Before we specify a system we look at wheel types, traffic routes and joint condition, because damaged joints and poorly prepared concrete are where warehouse coatings usually fail first.
02Repairs
03Process
We check slab condition, joints, cracks, existing coatings and moisture, and walk the forklift routes and turning areas with you.
We agree zones, access and timing so the areas you need stay operational.
Diamond grinding or mechanical preparation, then joint and crack repairs. Most coating failures start with poor preparation.
The specified system goes down, with walkways, bays and zones marked, then cures before traffic returns.
04Project evidence
A long steel shed finished in light-grey gloss epoxy. The project video further down this page shows another commercial warehouse floor we completed in grey epoxy.

→Get a quote
Tell us the floor area, suburb, how the floor is used and any time constraints. Photos of the current floor, joints and damaged areas help us quote accurately.
04Project video
05FAQ
Staging can often be planned around operations, for example by zone or aisle. We discuss access and sequencing when we quote.
Yes. Walkways, bays and zones can be built into the floor system.
Yes. We repair cracks and damaged joints, patch worn or broken areas, and remove and recoat failing coatings. We inspect the floor first and tell you whether repairs or a full recoat make more sense.
The floor area, suburb, current condition, how the floor is used (e.g. forklifts and pallet jacks) and any time constraints. Photos or plans help.
→Next step
Send us the floor area, location and current condition. Photos or plans help us quote accurately.